Installation Conditions
Synchron Table 4.0 + Synchron Table Light
Any questions?
Just send us an email!
Room conditions for CRUSE scanners
- The floor in the room must be stable and free of any vibrations.
- The room walls, ceilings and windows must be painted dark (black / dark gray) or overcast. No foreign light source should be visible during scanning.
- The room temperature must be between 20 and 25 ° C. Since the room can heat up considerably with frequent scanner use (especially with LED lamps), the room must be air-conditioned.
- The humidity should be a maximum of 70%.
- The environment should be as dust-free as possible.
- Power supply: self-protected current path 230 / V / 16A, 3 x 2.5 mm² with earthing.
- Direct connection with 3 x 2.5mm² or CEE.
- Sockets grounded.
Configuration Scanner PC
- State of the art workstation
- 2 x Gigabit network cards (one for the scanner and one for the home network)
- Monitor 24 inch or larger (to display accurate colors the monitor needs to be calibrateable, e.g. Eizo ColorGraphic Series)
- Windows 10 / 64 bit
- Connection to the internet
- Adobe Photoshop (recommended)
Configuration Factory/Hybrid PC
- High-performance state of the art workstation
- Minimum 64 GB RAM (recommended 128 GB for SynchronTable 295)
- High-performance graphic card with CUDA
- Monitor 24 inch or larger (to display accurate colors the monitor needs to be calibrateable, e.g. Eizo ColorGraphic Series)
- Windows 10 / 64 bit
- Connection to the internet
- Adobe Photoshop (recommended)